Blog enerDOM

Promotions

Accueil

SAVP200 ADSL2+ VDSL2 SPLITTER POTS ZC1 & ZC2 4KHz

SAVP200

Nouveau produit

ADSL2+ & VDSL2 Splitter POTS lines (Plain Old Telephone Services) for lines with complex impedance ZC2= 320? + (1050 // 230nF) according British Telecom ITU-T G.992.1 & SIN346 and also for ZC1= 270? + (750 // 150nF) without billing tone.

Used specially in UK and also in most of the European countries with ZC1 complex impedance without billing tone.

Plus de détails

33 Produits

Disponible - Prix spéciaux pour quantité - Contact Dept. commercial.

17,00 € TTC

Fiche technique

Especificación TécnicaSpliiter POTS Zr 600 ohms Banda paso voz 4KHz.
Insertion loss in P.B. for 1KHz -inferior a 1dB
Distorsión pérdidas inserción ( B.P. ) -inferior a 0,5dB
Pérdidas retorno en B.P. entre ( 0,3KHz -0,5KHz ) -14dB min.
Pérdidas retorno en B.P. entre ( 0,5KHz -2KHz ) -18dB min.
Pérdidas retorno en B.P. entre ( 2KHz -3,4KHz ) -14dB min.
Impedancia de referencia -ZC1 - 270 + 750 // 150nF & ZC2 - 320+1050 // 230nF
Atenuación Banda VDSL2 entre (32KHz - 138KHz) -45dB min.
Atenuación Banda VDSL2 entre ( 138KHz - 30MHz )) -55dB min.
Pérdidas inserción VDSL2 entre ( 32KHz - 30MHz ) -inferior a 1dB

En savoir plus

ADSL2+ & VDSL2 Splitter POTS for complex impedance ZC2= 320? + (1050? // 230nF) according British Telecom ITU-T G992.1 & SIN346 and also for ZC1= 270 + (750 // 150nF) without billing tone.

It allows to have in the subscriber’s house two independent lines, voice and data, therefore all the analogical equipment can be used at the same time (telephones, fax, alarms, etc.), without the use of a microfilter for every equipment and without affecting the actual installation.

SAVP200 - Using a splitter in your internal telephone network, you improve the router sincronization, and you have an extra protection for overvoltages in the line, 2 PTC serie in each wire and one tiristor with double polarity between both wire lines.

Easy installation - You can install in two systems, with RJ11 connectors or direct cables, because the connections are jumped ( LINE - PONE - DATA ),  we recomended to use the direct cables solution, explained in the data sheet and in the instructions in the box.

Countries - All countries with complex impedance lines like ZC2= 320? + (1050 // 230nF) according British Telecom ITU-T G.992.1 & SIN346 and also for ZC1= 270 + (750? // 150nF) without billing tone.?  

Used specially in U.K. (British Telecom) and also most of European countries for ZC1 and without billing tone, like Islandia, Latvia, Hrvatska, Dinamarca, Chipre, etc..?

  • Blog
  • Accessoires

    Téléchargement

    Instal. Splitter ED 16L

    Installation facile splitter ED - 16 langues

    Téléchargement (0)

    info SAVP200.en

    Specifications Techniques SAVP200 anglais

    Téléchargement (0)