Blog enerDOM





Nouveau produit

ADSL2+ & VDSL2 splitter for POTS (Plain Old Telephone Services) of 600Ω impedance and without Billing tone. Used in Spain, USA, Russian Federation, Japan, South America and other European countries.

Plus de détails

67 Produits

Disponible - Prix spéciaux pour quantité - Contact Dept. commercial.

15,30 € TTC


17,00 € TTC

Remise sur la quantité

QuantitéRemiseVous économisez
5 25% Jusqu'à 21,25 €

Fiche technique

Especificación TécnicaSpliiter POTS Zr 600 ohms Banda paso voz 4KHz.
Insertion loss in P.B. for 1KHz -inferior a 1dB
Distorsión pérdidas inserción ( B.P. ) -inferior a 0,5dB
Pérdidas retorno en B.P. entre ( 0,3KHz -0,5KHz ) -27dB min.
Pérdidas retorno en B.P. entre ( 0,5KHz -2KHz ) -18dB min.
Pérdidas retorno en B.P. entre ( 2KHz -3,4KHz ) -20dB min.
Pérdidas inserción ADSL entre ( 32KHz -50KHz ) -inferior a 3dB
Pérdidas inserción ADSL entre ( 50KHz -2,2MHz ) -inferior a 1dB
Impedancia de referencia -600 ohms
Atenuación Banda VDSL2 entre (25KHz - 17MHz) -65dB min.
Atenuación Banda VDSL2 entre ( 17MHz - 30MHz )) -55dB min.
Pérdidas inserción VDSL2 entre ( 25KHz - 30MHz ) -inferior a 0,3dB

En savoir plus

Splitter for ADSL2+ & VDSL2 for POTS lines Zr 600Ω impedance and without Billing tone.

It allows to have in the subscriber’s house two independent lines, voice and data, therefore all the analogical equipment can be used at the same time (telephones, fax, alarms, etc.), without the use of a microfilter for every equipment and without affecting the actual installation.

SAVP001 - Using a splitter in your internal telephone network, you improve the router sincronization, and you have an extra protection for overvoltages in the line, 2 PTC serie in each wire and one tiristor with double polarity between both wire lines.

Easy installation - You can install in two systems, with RJ11 connectors or direct cables, because the connections are jumped ( LINE - PONE - DATA ),  we recomended to use the direct cables solution, explained in the data sheet and in the instructions in the box.

Countries - All countries with lines of 600Ω impedance without Billing Tone. Make attention because in some countries can exist diferent companies and one of them can use billing tone signal and in this case you need to use the SAP020 (band pass voice 16KHz ) or SAVP020 for VDSL2.

Used in countries like : Spain, Armenia, Bielarous, Ukraine, Russian Federation, USA, Brasil, Venezuela, Costa Rica, Uruguay, Perú.

  • Blog
  • Accessoires


    Instal. Splitter ED 16L

    Installation facile splitter ED - 16 langues

    Téléchargement (0)


    Specifications Techniques espagnol

    Téléchargement (0)


    Specifications Techniques SAVP001 italien

    Téléchargement (0)

    info SAVP001.en

    Specifications Techniques SAVP001 anglais

    Téléchargement (0)