0 Item Items
Model no longer available - Replacement equivalents
Warning: Last items in stock!
|Pass Band (P.B.)||Between 0 Hz -16KHz.|
|Insertion loss in P.B. for 1KHz -||less than 1dB|
|Distortion insertion loss in ( P.B. ) at 1KHz -||inferior a 0,5dB|
|Return loss in P.B. ( 0,3KHz -0,5KHz ) -||14dB min.|
|Return loss in P.B. ( 0,5KHz -2KHz ) -||18dB min.|
|Return loss in P.B. ( 2KHz -3,4KHz ) -||14dB min.|
|Line impedance -||ZC1 - 270 + 750 // 150nF|
|VDSL2 Insertion loss ( 32KHz - 50KHz )||less than 3dB|
|VDSL2 Insertion loss ( 50KHz - 30MHz )||less than 1dB|
|VDSL2 Band attenuation ( 32KHz - 30MHz )||55dB min.|
Splitter for ADSL2+ & VDSL2 Splitter POTS for complex impedance lines ZC1- 270Ω + (750Ω/150nF) telephone services with Billing Tone ( 12KHz. or 16KHz. )
It allows to have in the subscriber’s house two independent lines, voice and data, therefore all the analogical equipment can be used at the same time (telephones, fax, alarms, etc.), without the use of a microfilter for every equipment and without affecting the actual installation.
SAVP120 - Using a splitter in your internal telephone network, you improve the router sincronization, and you have an extra protection for overvoltages in the line, 2 PTC serie in each wire and one tiristor with double polarity between both wire lines.
Easy installation - You can install in two systems, with RJ11 connectors or direct cables, because the connections are jumped ( LINE - PHONE - DATA ), we recomended to use the direct cables solution, explained in the data sheet and in the instructions in the box.
Countries - All countries with lines of the impedance ZC1 is 270Ω + (750Ω//150nF) and with Billing Tone, and also compatible for countries without billing tone services with this ZC1 complex impedance.
Countries like : Itally, France, Portugal, Osterreich, Belgique, Hrvatska, Czech Rep. Romania, Switzerland, Tunisie, Slovenska, Suomi, Turkey, Nederland, Hungary, Ireland, Island, Letuva, Luxemburg, Malta, Marroc, Noreg, Polska.