High Efficiency original Power supply...
ADSL splitter for POTS (Plain Old Telephone Services) of 600 Ω impedance and without Billing tone. Used in Spain, USA, Russian Federation, Japan, South America and other European countries.
-38 Item Items
Replaced by SAVP001
Warning: Last items in stock!
|Pass Band (P.B.)||Between 0KHz - 4KHz.|
|Insertion loss in P.B. for 1KHz -||less than 1dB|
|Distortion insertion loss in ( P.B. ) at 1KHz -||max. 0,5 dB|
|Return loss in P.B. ( 0,3KHz -0,5KHz ) -||14dB min.|
|Return loss in P.B. ( 0,5KHz -2KHz ) -||18dB min.|
|Return loss in P.B. ( 2KHz -3,4KHz ) -||14dB min.|
|ADSL Band attenuation (30KHz - 300KHz) -||65dB min.|
|ADSL Band attenuation (300KHz - 2,2MHz) -||55dB min.|
|ADSL Insertion loss ( 32KHz -50KHz ) -||less than 3dB|
|ADSL Insertion loss ( 50KHz -2,2MHz ) -||less than 1dB|
|Line impedance -||600 ohms|
Splitter for ADSL2+ for POTS lines Zr 600Ω impedance and without Billing tone.
It allows to have in the subscriber’s house two independent lines, voice and data, therefore all the analogical equipment can be used at the same time (telephones, fax, alarms, etc.), without the use of a microfilter for every equipment and without affecting the actual installation.
SAP001 - Using a splitter in your internal telephone network, you improve the router sincronization, and you have an extra protection for overvoltages in the line, 2 PTC serie in each wire and one tiristor with double polarity between both wire lines.
Easy installation - You can install in two systems, with RJ11 connectors or direct cables, because the connections are jumped ( LINE - PONE - DATA ), we recomended to use the direct cables solution, explained in the data sheet and in the instructions in the box.
Countries - All countries with lines of 600Ω impedance without Billing Tone. Make attention because in some countries can exist diferent companies and one of them can use billing tone signal and in this case you need to use the SAP020 (band pass voice 16KHz ) or SAVP020 for VDSL2.
Used in countries like : Spain, Armenia, Bielarous, Ukraine, Russian Federation, USA, Brasil, Venezuela, Costa Rica, Uruguay, Perú.
Remember that you can also use the SAP020 for ADSL2 +